» Home  » Careers  » News  » Enquiry Form  » Contacts & Locations » Login
homeaboutproductsservicescareerscontact
about
 
Home » Products » Gas Filter Separator

Gas Filter Separator

HORIZONTAL COALESCING SEPARATOR

SPEC Horizontal double barrel and/or Vertical filter separators are designed to provide efficient liquid/solid removal and high gas capacities. The coalescer filter section removes bulk liquid and solid particles and also coalesces fine liquid droplets into larger ones. These larger droplets are then removed in the second Double Pocket (DP) Vane] section. SPEC utilizes high capacity DP Vanes to increase the separator’s throughput and thus minimize the separator diameter.

The double barrel configuration allows you to maximize the gas flow in the upper barrel without re-entrainment while the liquid drops into the lower barrel. SPEC offers standard coalescing filters that can be replaced periodically or designs that can be cleaned and reused.

BENEFITS

  • High gas capacity with a compact vessel
  • Low maintenance
  • No plugging of the DP Vane
  • High efficiency
  • Debottle neck existing equipment

APPLICATIONS

  • Gas Plants
  • Transmission Stations
  • Gas Inlet to Chemical & Petrochemical Plants
  • Gas Gathering Systems
  • Turbine Fuel Gas

MECHANICAL FEATURES

  • ASME Pressure Vessel Code, Section VIII, Division 1 and stamped with ASME “U” symbol.
  • Element Support Plate and bottom drains completely drain the vessel for inspection, cleaning, and element change outs.
  • Designed with quick open closure for easy access to change filter elements.
  • Standard Design pressure, 1440.
  • Design temperatures are -20°F to 130°F for stock vessels.

EXPERT DESIGN, SERVICE & SUPPORT:

You can always count on SPEC for an experienced and professional recommendation. SPEC has experts who can assist
in the proper sizing of coalescing and filtration products for your application. Contact SPEC for your Horizontal Coalescing
Separator needs.

THE HORIZONTAL COALESCING SEPARATOR PROVIDES EFFECTIVE COALESCING OF AEROSOLS STREAMS WHEN PLACED IN FRONT OF:

  • Compressors to remove water/oil mist and dust which could cause damage to the valves and cylinders
  • Desiccant dehydrators to prevent lube oil mist or other liquid contaminant from entering the absorbent bed causing
    degradation loss or effectiveness of the desiccant or treating media.
  • Glycol dehydrators to remove compressor lube oil mist, from the gas stream, to prevent contamination or foaming of
    the glycol fluid.

THE HORIZONTAL COALESCING SEPARATOR PROVIDES EFFECTIVE COALESCING OF AEROSOLS STREAMS WHEN PLACED AFTER:

  • Compressors to remove lubricating oil mist in the discharge stream
  • Contactors to remove glycol or amine carryover downstream

 

VERTICAL COALESCING SEPARATOR

The removal of entrained liquid aerosols, such ascompressor lube oils, trace hydrocarbons, and water mist, from natural gas
streams is necessary for the protection of downstream equipment. Efficient removal of these contaminants, by use of an effective
coalescing separator and media combination can prevent costly problems and downtime with downstream equipment, such as
compressors, membranes, instrument valves, piping, etc.

FEATURES OF A VERTICAL CONFIGURATION:

  • Utilizes gravity to remove liquid.
  • Only the lower portion of the element is saturated with liquid.
  • Ability to allow more flow-through in a given house size.
  • Ability to down-size expensive hardware and maintain flow rates.

MECHANICAL FEATURES:

  • ASME Pressure Vessel Code, Section VIII, Division 1 and stamped with ASME “U” symbol.
  • Element Support Plate and bottom drains completely drain the vessel for inspection, cleaning, and element change outs.
  • Designed with quick open closure for easy access to change filter elements.
  • Standard Design pressure, 1440.
  • Design temperatures are -20°F to 130°F for stock vessels.

EXPERT DESIGN, SERVICE & SUPPORT

You can always count on SPEC for an experienced and professional recommendation. SPEC has experts who can assist in the proper sizing of coalescing and filtration products for your application. Contact SPEC for your Vertical Coalescing Separator needs.

THE VERTICAL COALESCING SEPARATOR PROVIDES EFFECTIVE COALESCING OF AEROSOLS STREAMS WHEN PLACED IN FRONT OF:

  • Compressors to remove water/oil mist and dust which could cause damage to the valves and cylinders
  • Desiccant dehydrators to prevent lube oil mist or other liquid contaminant from entering the absorbent bed causing degradation loss or effectiveness of the desiccant or treating media.
  • Glycol dehydrators to remove compressor lube oil mist, from the gas stream, to prevent contamination or foaming of the glycol fluid.

THE VERTICAL COALESCING SEPARATOR PROVIDES EFFECTIVE COALESCING OF AEROSOLS STREAMS WHEN PLACED AFTER:

  • Compressors to remove lubricating oil mist in the discharge stream
  • Contactors to remove glycol or amine carryover downstream

 

Top ^

 

Resolution 1024 x 768. Copy Right © SPEC Oil & Gas Technologies