Our range
SPEC engineers and fabricates separation, gas conditioning, hydrocarbon recovery, oil processing and produced water systems, with the ancillary equipment that supports them. Equipment is configured to the project process data and assembled and tested where required by scope.
Equipment Range
Explore SPEC equipment by process duty. Select a category to view the equipment and systems available within that range.
Select an equipment item to view its detail page.
Sweetening, dehydration and compression systems for natural gas treatment.
Removes H₂S and CO₂ from sour gas to meet downstream or sales-gas requirements.
Removes water vapour from natural gas to control hydrates and meet moisture specifications.
Deep dehydration for cryogenic processing and other low-dew-point applications.
Gas compression systems configured for process, transfer and operating requirements.
Dew point control, cryogenic gas processing and NGL/LPG recovery trains sized to feed composition and product targets.
-p-800.png)
Controls condensation of heavier hydrocarbons through cooling and separation.
Low-temperature processing for deeper hydrocarbon-liquid recovery and gas conditioning.
Fractionation trains configured to achieve the required product cuts and specifications.
Recovers propane- and butane-rich liquids from hydrocarbon gas streams.
Two- and three-phase separators, filter separators and free water knock-out vessels for wellhead and inlet duty.
Removes entrained liquids and solids from gas before downstream processing or compression.
Separates produced fluids into gas, hydrocarbon liquid and water phases.
Removes bulk free water from produced liquids before downstream oil treatment.
Crude and condensate stabilization, heater treaters and electrostatic desalting to export specification.
Reduces light components and vapour pressure before storage, export or further processing.
Uses controlled heating and residence time to promote oil-water separation.
Uses heat and electrostatic coalescence to remove dispersed water and, where required, salts.
Hydrocyclones, corrugated plate interceptors, flotation units and nutshell filters treating produced water for discharge or reinjection.
Centrifugal separation for removing dispersed oil from produced water.
Plate-assisted gravity separation for removing free oil and suspended solids.
Fine air bubbles lift oil and suspended solids to the surface for removal.
Dispersed gas bubbles separate residual oil and solids from produced water.
An IGF vessel fitted with coalescer packs and diverter plates to improve oil removal.
Nutshell media filters polishing produced water ahead of discharge or reinjection.
Water bath heaters, heat medium packages, pig launchers and receivers and supporting utility systems.
Provides circulating heat-transfer fluid for indirect process heating duties.
Provides controlled indirect heating of gas or liquid process streams.
Equipment for safely introducing and retrieving pipeline pigs.
Supporting utility equipment configured around process-facility requirements.
Core Equipment Types
A visual guide to the main physical equipment types used across SPEC process systems. Their configuration varies according to process duty, operating conditions and project requirements.
Explore representative equipment types used across SPEC process systems.
Suitable where greater liquid hold-up, residence time or multi-phase separation is required.
Used in: Phase Separation · Gas Conditioning · Oil Processing
Suitable for gas-dominated duties or applications where plot space is limited.
Used in: Gas Conditioning · Hydrocarbon Recovery · Oil Processing
A pressure vessel fitted with internals to separate gas, hydrocarbon liquids and water, in two-phase or three-phase configurations.
Used in: Phase Separation · Oil Processing
A tall vessel fitted with trays or packing, selected where gas and liquid need staged contact for mass transfer.
Used in: Gas Conditioning · Hydrocarbon Recovery · Oil Processing
Brings gas into contact with a liquid such as amine or glycol to remove acid gases or water vapour.
Used in: Gas Conditioning
Removes lighter components from hydrocarbon liquids using heat or stripping gas, for example to stabilize crude oil or condensate.
Used in: Oil Processing · Hydrocarbon Recovery
Transfers heat between process streams while keeping the fluids physically separated.
Used in: Gas Conditioning · Hydrocarbon Recovery · Oil Processing
Supplies heat to generate vapour at the base of a column or in a glycol or amine regeneration circuit.
Used in: Gas Conditioning · Oil Processing
Removes heat from a process stream or condenses vapour to liquid; air-cooled designs use ambient air as the cooling medium.
Used in: Hydrocarbon Recovery · Gas Conditioning · Oil Processing
SPEC can integrate equipment into skid-mounted, multi-module or field-assembled process systems according to project requirements.
Combines equipment, piping, valves and instrumentation on one structural base, allowing workshop assembly and transport as a single unit.
Used in: Multiple process applications
Integrates measurement and flow-control equipment into one structured assembly for gas or liquid metering duties.
Used in: Gas and liquid handling applications
Divides a larger process system into transportable modules connected at site, used where one skid would be too large to transport.
Used in: Larger process facilities
Project Experience
Process equipment and modular process systems supplied for gas processing, crude treatment and refining projects.
View all projects
Enquiries
Send us your process data and operating conditions, and we will review the duty with you.
Contact Us
%203.png)
.png)
%205.png)
%205.png)
%205.png)
%204.png)
%204.png)
%202.png)
